A few months back, i posted some little decoupaged Trinket Trays and saucers. Everyone really liked them, so i thought i’d give you a little tutorial on the process i use to make them. It’s quite easy, you just have to pay attention to detail.
i originally found random little saucers and such at thrift stores and re-purposed them, but eventually needed more than i could find and ended up ordering round soy sauce dishes from KOYOshop.com. At the time of this post, their site was under construction/maintenance, but i got item YW22. 30 little dishes cost me $15. i thought that was a great deal : )
Anyway! onto the tutorial
1- set up your prints. Use a flexible/cloth tape measure to determine the diameter of your dish. the KOYO dishes are about 4″ in diameter. then set up circles with that diameter on the computer. i used favorite art prints and cropped them into my circles. You could also cut your circles from any thin, somewhat porous paper like magazines or wrapping paper.
2- Apply Mod Podge (glossy) to the inside of the bowl. Be neat. Try not to get it over the edge of the bowl and don’t goop it on. you want a nice even layer that won’t squoosh out too much over the edges when you press your paper disc on.
3- i always have a damp napkin or paper towel beside me so i can lightly press the back of my paper disc to it before applying to the bowl. it makes the paper limp and easier to work with as you coax it along the curved sides of the bowl.
4-place the center down first and gently press, don’t rub too much, toward the edges. Then i get into pie-crust mode. i use both thumbs inside the bowl and my fingers behind to work my way around the circumference of the bowl. you’ll get into a groove. Trust me. Make sure the paper is adhered right up to the edge, but don’t bend it over the edge. We’ll trim the excess off carefully with small scissors once the paper is fully dry and “crispy” again.
5- optional – i make a disk for the bottom of the dish with my logo for retail purposes and you might want to do so also…to include a little note or “love, mommy”
6 – Once the bowl is completely dry and trimmed, apply a layer of Clear Polyurethane or other varnish that is non-yellowing. Dry. Apply a 2nd coat.
* since i’m impatient, i discovered that i can poly the inside and bottom of the bowl at the same time and then rest the bowl on a roll of masking tape (the perfect size!) so that no wet surfaces are making contact with the table! so efficient!
7- When everything is completely dry, you can smooth out any remaining rough edges using an emery board or piece of fine sandpaper. i like the emery board. i sit in front of the tv and file away as though i’m doing my nails – haha
So that’s it! Give it a try and make some lovely keepsakes for loved ones. These are perfect for jewelry next to the sink, coins on the dresser, paperclips on your desk, or even your kiddo’s precious lost teeth on the nightstand for the tooth fairy! Just remember that they are not food-safe and also not meant to be submerged in water since they are composed with paper. Happy crafting!!